NEWS CENTER

新闻中心

  • 耐磨铜铸件铸造过程中应该注意什么
  • 本站编辑:杭州深众铜装饰工程有限公司发布日期:2021-03-29 15:49 浏览次数:

一、耐磨铜铸件钱铸造的酸洗。


1、 Pickling of wear-resistant copper castings.


耐磨铜套的铸造工艺复杂,要求非常严格,因为一旦铸造过程中出现问题,铜套就会有缺陷甚至废品。铸造耐磨铜套时,应注意加工前的酸洗处理。如果不进行酸洗,氧化将很容易导致铜套剥落。铜套筒的氧化问题非常严重,因此在耐磨铜套的铸造过程中应避免这个问题。

2-161009142T5-51-lp.jpg

The casting process of wear-resistant copper sleeve is complex, and the requirements are very strict, because once there are problems in the casting process, the copper sleeve will have defects or even waste products. When casting wear-resistant copper sleeve, attention should be paid to pickling treatment before processing. If the pickling is not carried out, the oxidation will easily lead to the peeling of the copper sleeve. The oxidation problem of copper sleeve is very serious, so this problem should be avoided in the casting process of wear-resistant copper sleeve.